|
Super Heated Water Generator
Vacuum chambers of INDUS-2 are made of aluminium alloys. For uniform and controlled baking of these chambers, super heated water was the best option. Indigenously developed superheated water bake out system was utilized for in-situ baking of these chambers. Power requirements for an in-situ bake out at 1500C was calculated as, 0.64 kW mt-1 and 3.2 kWmt-1 for straight section and dipole chamber respectively (for one baking segment 60 kW).
Main Parameters of the Generator
Fluid |
D.M. water (Conductivity <1 m Siemens/cm; pH > 6(250C)). |
Temperature |
From 20oC to maximum 150oC |
Installed Heating Capacity |
65kW (15 kWx4 Nos. & 5 kW x1Nos.)
SS 304 Encased Nichrome heaters; 600mm &520 mm |
Pump Capacity |
Centrifugal Pump, Single stage
4m3/hr., 7.5bar,N=2400rpm,
T=2000C max. Make: KSB, Model : MEGACHEM |
Circulating pressure |
5 bar |
Cooling Capacity |
25,000 Kcal/hr. at 1500c |
Temperature Control System |
mp based PID Temp. controller with digital display control and monitoring features |
Level control system |
Float type magnetic reed with electrical NO/NC contacts for control |
Pressure monitoring |
Pressure measurement through Bourdon type gauge and indication |
Super Heated Water Generator (for INDUS-2)
|
